CareSens N Strips (no coding): designed to work with the CareSens N and CareSens N POP meters. These strips don’t require coding, which can speed up the testing process How to use CareSens N strips: These strips don’t need manual coding and are designed to work with the CareSens N and the CareSens N POP meters.

B. PREPARING THE METER AND TEST STRIP 1.Wash your hands and the site from which the blood will be drawn. 2.Gently insert the square end of the test strip into the meter port with its contact bars facing upwards. The (strip with blood drop) symbol should appear on the screen. 3.Get a blood sample using your lancing device (see instructions above). 4.Touch the pointed tip of the strip into the blood droplet on your finger, making sure the blood fills up the small window on the black side of the strip. Note: You only need about 0.5µl of blood (about the size of a pinhead). 5.Once the blood sample has filled the confirmation window, the meter will beep. If the window hasn’t filled, an Er4 message will appear. 6.The test result will appear after the meter counts down from 5 to 1. The result will automatically be stored in the meter’s memory. Note: the test strip must be inserted into your meter before applying blood to the pointed end. The meter does not require any manual coding. CareSens N blood glucose test strips are for use only in CareSens N and CareSens N POP meters.