The auction closed and did not sell.
- Browse Radio control
Imafanz Test Stand for 30 - 90 size Heli's
-
No reserve
- Closed: Thu 15 Oct 2009, 6:30 pm
- Listing #: 246665628
This is the first product from the Imafanz Hanger and is one that every RC Heli pilot should have.
With this test stand you can check all functions of your Pod & Boom Heli prior to lift off.
Including:
Engine tuning from idle to full throttle
Cyclic controls
Collective pitch
Blade tracking
Tail gyro function and sensitivity and much much more
Have full confidence on lift off.
Not only that but it makes a great display stand and workshop jig enabling you to spin your Heli to work on what ever you need to.
A must have for everyone from the learner/novice to the seasoned professional. Once you use this you'll wonder how you ever got by without it.
I've been testing and using one of these for over 12 months and I'd be lost without it.
Got a slight vibration? Pop your Heli onto the stand, run it up and make finding the cause so much easier.
When you receive the Imafanz Test Stand
it weighs about 7KG. To increase the weight you simply open the base, spread out the plastic liner and fill the base with instant cement.
Let the cement set then screw the base back on.
Included is a handle ready to install which must be done prior to filling the base. This gives a total weight of around 30kg to hold your Heli in place.
You can decide the weight you want.
The rotating platform has two fixing points to suit your skid width and a locking pin to lock the rotator in place when it is not required to rotate.
The rotator base is covered with shiny
aluminum tread plate for good looks
and serviceability. The locking bar for your
skids is steel and set with two wing nuts
for easy fixing and removal.
Heavy duty and made to last.
Designed and made in New Zealand.
Heli not included.
View Video: http://www.youtube.com/watch?v=OeIQBpOL19Q
Included in this auction is also the offer of a Video production of your model, normally worth $150 for $125. (outside Canterbury travel costs apply) There is also the opportunity of on board footage and flying FPV with our video glasses. (conditions apply)
With this test stand you can check all functions of your Pod & Boom Heli prior to lift off.
Including:
Engine tuning from idle to full throttle
Cyclic controls
Collective pitch
Blade tracking
Tail gyro function and sensitivity and much much more
Have full confidence on lift off.
Not only that but it makes a great display stand and workshop jig enabling you to spin your Heli to work on what ever you need to.
A must have for everyone from the learner/novice to the seasoned professional. Once you use this you'll wonder how you ever got by without it.
I've been testing and using one of these for over 12 months and I'd be lost without it.
Got a slight vibration? Pop your Heli onto the stand, run it up and make finding the cause so much easier.
When you receive the Imafanz Test Stand
it weighs about 7KG. To increase the weight you simply open the base, spread out the plastic liner and fill the base with instant cement.
Let the cement set then screw the base back on.
Included is a handle ready to install which must be done prior to filling the base. This gives a total weight of around 30kg to hold your Heli in place.
You can decide the weight you want.
The rotating platform has two fixing points to suit your skid width and a locking pin to lock the rotator in place when it is not required to rotate.
The rotator base is covered with shiny
aluminum tread plate for good looks
and serviceability. The locking bar for your
skids is steel and set with two wing nuts
for easy fixing and removal.
Heavy duty and made to last.
Designed and made in New Zealand.
Heli not included.
View Video: http://www.youtube.com/watch?v=OeIQBpOL19Q
Included in this auction is also the offer of a Video production of your model, normally worth $150 for $125. (outside Canterbury travel costs apply) There is also the opportunity of on board footage and flying FPV with our video glasses. (conditions apply)
Please read the questions and answers for this auction.
Shipping details
- $31.00 P&P North Island
- $21.00 P&P South Island
- Seller allows pick-ups
- Seller is located in Christchurch City, Canterbury
Payment details
- NZ bank deposit
- Cash
- Pay Pal
About the seller
- 100% positive feedback
- Member since Sep 2009
Closes: Thu 15 Oct, 6:30 pm. 2009 This auction used auto-extend. 
Questions and answers
I recently purchased your heli test stand . I have found it extremly useful to work on the construction of my TREX 600 as it allows me to rotate the model around easily on my work bench. Also it saved my ass 3 days ago as i was ready to fire up the first time my electric main motor and for some reason the machine fired up full power on the bench i had to wait for the battery to die before i could get any where near it it took about 11 mins to die but held on with the rotors at full power .
sawmills (6 
)
11:07 am, Thu 15 Oct
I recently purchased your heli test stand . I have found it extremly useful to work on the construction of my TREX 600 as it allows me to rotate the model around easily on my work bench. Also it saved my ass 3 days ago as i was ready to fire up the first time my electric main motor and for some reason the machine fired up full power on the bench i had to wait for the battery to die before i could get any where near it it took about 11 mins to die but held on with the rotors at full power .
)
11:07 am, Thu 15 Oct
Cheers for the feedback. That must have been the worst 11 minutes of your life! Imagine what would have been the end scenario if it hadn't been tethered. Expensive to say the least! For this equipment to prove it's worth so early in it's release is very pleasing. Regards, Phil.
11:19 am, Thu 15 Oct
Cheers for the feedback. That must have been the worst 11 minutes of your life! Imagine what would have been the end scenario if it hadn't been tethered. Expensive to say the least! For this equipment to prove it's worth so early in it's release is very pleasing. Regards, Phil.
11:19 am, Thu 15 Oct