Brand New Free Replacement - Tempercon Ltd

NZ's #1 Low Pressure Shower Hot Water Booster Pump. RRP: $350 Anti-Rust - Brass Body.

Thousands of Kiwis are very happy with it since 2007.

Is your shower hot water pressure very poor or dribble?

• Pay $2500? - Replace main pressure cylinder & labour?
• Buy Now! - Enjoy a decent shower with low pressure cylinder at lowest cost!

Best Solution for Low Pressure Cylinder Shower in NZ

• Automatic boosting pressure when you open tap;
• Auto-stop when tap is closed;
• Pre-wired pump with NZ standard 3-pin plug;
• Simply fit it between cylinder outlet & tap/mixer;
• Use existing low pressure mixer and fittings;
• Suitable for single and two story house.

Main Use: Low pressure cylinder shower, Wetback, Washing machine, Garden tank, Gas & Solar water heater.

Specifications: Model: WPCL15GR10 Pump Inlet & Outlet: 20mm BSP Male Power: 90W-230V-50Hz Speed: 2860r/min Max. Head: 10m Max. Capacity: 1200L/H

Free Parts: 15mm Flow Switch: $37.50; Check Valve: $30.00.

Please read "About the store" for all details. http://www.trademe.co.nz/stores/tempercon

1. You need to fit Tempercon Check Valve at pump inlet for 100% performance.
2. You need to fit Tempercon Flow Switch at pump outlet for automatic operation.
3. If you do not fit them correctly, booster pump is not covered by warranty.
4. Booster Pump Model Options: WPCL15GR10 is for: Low/All Pressure Mixer, Original Fittings, Wall Mounted Shower Head , Low Pressure Cylinder with Roof Vent Pipe.
   WP15PBG10 is for: All/Low Pressure Mixer, Quiet Operation, Wall Mounted Shower Head, Low Pressure Cylinder with Roof Vent Pipe. WPCL15GR15 is for: Main/High/All/Low Pressure Mixer, Slide Shower, Low Pressure Cylinder with Roof Vent Pipe or Relief Valve.

We supply more than 100 models pumps.

For more "BUY NOW" options, please view "Seller's other listings".