New item Pay Now
Add this item to Cart for a combined free shipping deal
Click to enlarge photo

Listing Detail Tabs

BRAND NEW

****YOU ARE BIDDING FOR 50 UNIT***
50 FOR $75.00

DYNABOLT SCREWS 12 X 150 MM
GALVANISED

15KN FOR BRACING & BOTTOM PLATE

The Dynabolt Screws is an innovative, self tapping screw-in anchor, used to fasten fixtures in the light to medium duty range and will fasten materials to concrete and other solid masonry as well as hollow concrete block, solid pressed brick and extended wire cut bricks with holes therein.

Features Benefits
Large 75 mm outer diameter thread For a positive cutting groove in substrate
Smaller integrated balancing thread Correct alignment in the hole
Bigger 25 degree helix angle thread pitch Greater tensile strength in all substrates
Single large cutting thread Less torque during installation
Reduced shank core diameter More tolerant to worn drill bits
Greater diameter between threads Deeper thread embedment,higher tensile loads
Single sharp cutting thread Greater contact grip over entire embedment
Smooth under head profile Reducing head failure when over torqued
No expansion forces Close to edge and centre to centre spacing’s
Greater diameter between threads Deeper thread embedment, higher tensile loads
Anchor diameter marked on head Same size masonry drill bit
Removable with ease Leaving a small neat hole to patch up

Uses

Pallet racking
Temporary safety barriers
Conveyors pipe brackets
Gate hinges into brickwork
Temporary hand rails
Bottom plates
Used for fast and simple anchoring into solid concrete and masonry or hollow brick and block
To achieve maximum loads the installation process needs to be carried out as follows:

Installation

Drill a hole to the correct diameter and depth
Clean hole with a brush and remove debris with vacuum or hand pump
Using a socket wrench, screw the Dynabolt Screws into the hole exerting a slight downward pressure until the “self-tapping” starts
Tighten theDynabolt Screws If resistance is experienced whilst tightening, unscrew fastener one turn and re-tighten, ensuring not to overtighten Please click here to ask a question
Your question and answer privileges have been disabled.
You must log in to view questions and answers on this listing. We recommend reading questions before you make any purchases.
You must log in to ask or answer questions posted. We recommend reading questions before you make any purchases. Available only to approved bidders. You must be an authenticated member to ask questions Find out more about becoming authenticated. Your account is in debt Your current account balance is You must credit your account to use this feature.
Firearms Licence #
By entering my licence number, I confirm I am aware of my obligations under the Arms Act.
Transaction details may be provided to police in accordance with the Terms & Conditions.
Your current account balance is Please note you will lose your question and answer privileges if your account is in debt for more than 2 weeks. Credit your account.
I confirm that I am over 18 years old.
To prevent your personal details being misused please do not put emails or phone numbers in questions. Failure to comply may result in the suspension of your account. The seller cannot add a Buy Now price once bidding has started.

Shipping options

Buy more than one of this item and only pay for shipping once.
  • WITHIN AKL-METRO COURIER$4.60
  • WITHIN AKL - RURAL & WAIHEKE ISLAND$10.20
  • OUTSIDE AKL-METRO COURIER (& WARKWORTH METRO)$7.00
  • OUTSIDE AKL - RURAL COURIER (& WARKWORTH RURAL)$12.50
  • Seller allows pick-ups
  • Seller location: Waitakere City, Auckland, NZ

Payment options

  • Other options
    Cash, NZ bank deposit

Pay Now includes:

Buyer Protection Learn More