-------- HANDY WAREHOUSE ---------- -- Cheapest and Exlusive price in NZ --

THIS AUCTION IS FOR 2 kg Flat Head Twisted Nails 60X3.75mm Galvanised.

Handy Tips – Smooth Shank Nails / For Common Fixing A rule of thumb that can be used for determining the length of nail required is three times the thickness of the timber being fixed. e.g. 25mm Timber = 75mm Nail. Stagger nails where close nailing is necessary to prevent timber splitting. When nailing near the edge of the work surface it may be necessary to drill pilot holes using a slightly smaller diameter drill than the nail shank to stop the timber splitting. Wherever possible, skew nail to maximise joint strength.

Flat Head

• A large diameter head (normally up to 2.5 times the thickness of the nail shank). This head will sit slightly proud of the work surface.
• Flat head nails are designed to resist pull through on soft or thin timbers.
• This nail is used where the concealment of the head is not critical. Particularly suitable for strong construction. e.g. Framing.

Square Twisted Shank Made from square twisted wire, this nail shank is used where increased holding is required.

• Galvanised Nails Have been coated after manufacture with zinc for corrosion protection.
• Flat Head - A large diameter head (normally up to 2.5 times the thickness of the nail shank).
• Made from square twisted wire, this nail shank is used where increased holding is required.
• Suitable for exterior use.

Also Available(price for 100 QTY):

• 12x25mm---$10.00,
• 12x35mm---$10.00,
• 12x45mm---$10.00,
• 12x50mm---$12.00,
• 12x65mm---$16.00,
• 14x75mm---$30.00,
• 14x100mm--$35.00,
• 14x150mm--$45.00,
• Rubber Dome Roofing washers--$18.00,
• GALV HEX W/F TEK screws...

Any quantity require we can start an auction to suit you.

Please DO check "About this store'' for more info.

COMBINE SHIPPING: We will combine auctions, please pay highest shipping for the first item and $1.5 for every other items.

Pick up welcome.