SEE PHOTO

PRICE IS FOR ONE SHEET ONLY!

I have a lot of used roofing iron - had a new roof put on a few weeks ago. I have scrapped the really bad sheets (bad rust & holes etc) but have kept the sheets that are still usable.

I have one stack of LONG sheets (some are angle cut at the ends, one has a big hole from a flue and one just a small cut) for $5 a sheet. And a stack of shorter sheets - these are ALL angle cut for $5 a sheet, these are all varying lengths & will be shorter if you cut them flat - longest after cutting is 1.8m and the smallest will be under 1M (these sheets more ideal for small patch ups?) THESE ARE IN THE FIRST PHOTO.

I also have a stack of sheets that have NO cuts & straight ends w/ no angles. But these are $8 a sheet as they are much better - they do have nail holes though and some slight surface rust! But are more usable and require less cutting unless they are too long (lengths are about 1.8 - 2.4M). THESE ARE IN THE SECOND PHOTO.

Some have slight surface rust but a wire brush & fresh lick of paint will get rid of that! And ALL sheets have nail holes (unavoidable as they ARE used), but you can reuse the holes. ALL the sheets have the old paint on them but can be stripped or brushed off then repaint them.

If you use the buynow you can have one sheet from any pile except the $8 sheet pile, ask me first so I can change buynow for you.

YOU pick & chose what YOU want.

FIRST IN FIRST SERVED!

This roofing iron will be ideal for:- Roof patch ups on a house or garage/carport. Making a dog kennel. Sheet Iron artist (cut the iron to make things). Make a Lean-To. Make an iron fence. Or whatever you want to do with them! Options can be endless.

Iron is about $30+ per sheet? So I have made my prices low to allow for that. Please don't buy these if you want perfect iron!

Buyer must pickup from Glenview, Hamilton.

Any questions please ask!

SEE MY OTHER LISTINGS