Proven record for removal of humidity and condensation for NZ homes, some feed backs;

"...really pleased. My husband easily fitted the system and in a few days we have really noticed a difference".

"..house much warmer using differential temp thermostat.."

"..far exceeded my expectation.."

The basic unit can be installed as a plug in by DIY with full instructions included or by an electrician at an estimated cost $condensations0 to hide the wires.

Key Features:
* Replaces humid air with drier fresh healthy air and removes condensation.
* Will recover heat collected in the roof space. (reducing heating costs)l
* Manual or authomatic control (with optional dual function digital thermostat for local and remote authomatic operation, optional at $70.00).
* Includes all fittings for installation in the roof cavity.
* Dust filter (optional G4 filter at extra $40.00 highly recommended).
* 25 watt thermally protected axial flow inline fan with ploycarbonate blade has low operating cost. (approx 5 cents per day for 10 hours usage) about 200 cfm or 330 m3 / hr
* 3m expandable ducting(change to Aluflex ducting optional for extra $15.00).
* 1 year parts or replacement warranty if unit becomes faulty.

Further information:

System is based on Positive Pressure Ventilation System; effectively it performs this function by replacing existing humid air in the home/office by drier air from the roof cavity leaving the home space filled with new healthy air for better health no smell.
Recommended use is to activate the system for around 5 hours per day (average home 140 Sqm).

Designed by a NZ engineer for safety and performance not a marketer!

The thermally protected fan, the thermostat and the 5 meter three pin plug are certified and issued with SDoC certificate.

Using differential thermostat with remote sensor in roof space will switch the system on when roof space is warmer then living space the fan and the fan starts replacing the damp air inside authomatically.