Solenoid Valve 20mm 12V- Hot Water On/Off Control

NEW SHIPMENT IN PRICE REDUCED WAS $62.40 now $54.60 save...

Brand New 12 months RTB warranty

Specifications:

DESCRIPTION: 100% Brand new and high quality Two position, normally closed valve ,electro-magnetic solenoid water valve. Made from high quality precision machined brass, NBR ( acrylonitrile-butadiene rubber) seal. Can be installed at any angle. Used to control liquid or gas in the a pipeline. Model: 2W-200-20 Working Medium: Air, Water, Oil, Week acid & alkali, Vacuum and Hot water Operating Method: Direct lift action Type: Normal Closed Pipe Size: 3/4" ( 20mm ) Type: normally closed (NC) on/off type Maximun Working Pressure: 01.0Mpa Working Temperature: -5 deg 80 deg (100 deg intermittant) Oil Seal Material: NBR Operating pressure: Min 0kg/cm² ~ max 10kg/cm² (00.8Mpa) Voltage: DC 12Vdc Protection class: IP65 Material: Brass Color: As in the picture Flow bore diameter: approx. 20mm Dimension: L68 mm x H110 mm x W55 mm Connection: 3/4" BSP (20mm) female threaded connections

INCLUDED:

1 x Solenoid Valve complete with 150mm wire tails

Can be used in conjunction my my other auction, Thermostat (via contactor) to control the flow of hot water in solar hot water system. 12 Volt remote water control, heat exchanges, bypass control, automatically cut condenser water at the end of brewing/distilling process, garden watering system, hydroponics, graffiti water spray systems, roof top water sprayers etc

.We dont mark up on shipping charges so be assured of the best deal possible, thanks