A clear, Hardwax Oil finish for interior wooden floors and furniture as well as timber panelling, ceilings and trim. Available in 4 sheen levels: Gloss, Satin, Semi-Matt (Low Sheen) and Matt. Osmo Polyx-Oils are a clear, durable, low maintenance, food safe oil and wax combination for interior timber or cork flooring, as well as timber furniture including baby's cots, bassinets and playpens. Also suitable for exposed timber beams, sarking, panelling and timber benchtops. Suitable for a variety of timber types - both hardwood and softwood - such as Pine, Rimu, Kauri, Macrocarpa, Oak, Beech, Eucalyptus, Jarrah and Douglas Fir (Oregon). Polyx®-Oil, once fully cured, will not crack, flake, peel, blister or water mark and is stain resistant against wine, beer, cola, coffee, tea, fruit juices, milk and water. As durable as polyurethane, and far easier to repair when scratched or worn down. Easy to apply, with 2 thin coats being applied 12 - 24 hours apart. Sanding in between coats is generally not necessary. Application can be by roller or brush; however a brush is Osmo's recommended applicator. Ensure your brush is a new, good quality bristle brush. (Osmo's 220mm floor brush is ideal). If using a roller, make sure the sleeve is micro fibre with a nap of no more than 5mm. Care should be taken to limit the amount of oil held in the roller, otherwise over application can result.

Key Words:

Flooring Timber flooring Flooring Wooden flooring Hard wax oil Interior wooden floors Oil finish