Main application- Reprographi, Curing special paints, sealants etc.

Single bulb cost $150 dollars on its own. It is high output 0.86A
Note: 110v ,may run on 220 but haven't tried. Ballast suppose to allow it(?).
• Two, 40 watt fluorescent UVA Philips bulbs
• 2,000 hour bulb life
• Built in reflectors increase spectral output
• Sturdy tripod base adjusts from 23" to 48"
• UVA output is a minimum 7 milliwatt/cm” at 5 inches from face of bulbs
• Variable angled mounting bracket enables the angle of the light to be adjusted to match the angle of the headlight
• Includes one adjustable light base and two 40-watt bulbs.

Product Information
General Characteristics
• Cap-Base G13
• BulbT38
• Main Application- Reprography
• Useful Life 2000 hr
• Color Code 10-R
• Color Designation (text) Ultra Violet A
• Chromaticity Coordinate X 222 -
• Chromaticity Coordinate Y 210 -
Electrical Characteristics
• Lamp Wattage40 W
• Lamp Wattage Technical 40.5 W
• Lamp Voltage 50 V
• Lamp Current 0.86 A
Environmental Characteristics
• Mercury (Hg) Content 13.0 mg
UV-related Characteristics
• UV-A Radiation 100hr (IEC) 8.1 W
• UV-A Radiation 0hr (IEC) 8.7 W
Product Dimensions
• Base Face to Base Face A 589.8 (max) mm
• Insertion Length B 594.5 (min), 596.9 (max) mm
• Overall Length C 604 (max) mm
• Diameter D 40.5 (max) mm



Note: This is not for sun bedding!!!

UV,UVA,Curing, sealant,Photography, Reprography, Special lights, UV stabilizers, Ultra violet light,