Teak Oil Marine - 4L

More sizes available – please see other listings

A premium quality, fast-drying wood oil designed for the marine environment, with a light Teak pigment to give added UV protection and will not crack or peel. This product is not a varnish (which sits on the surface) but is designed to penetrate into your timber giving a tough, durable finish whilst creating a warm natural luster.

Uses: Exterior/Marine, suitable for teak decks, trims, coamings and interior joinery where a hard-wearing, easily maintained finish is required.

Recommended Use: Suitable for teak decks, trims, coamings and interior joinery where a hard-wearing, easily maintained finish is required.

Coverage: Previously oiled timber, 12-16 m2 per litre. Dressed smooth timber, 6-12 m2 per litre. Rough sawn or porous timber, 2-8 m2 per litre.

Preparation: Ensure wood is clean, dry and mould free with moisture content below 18%. Treat any mould or moss with appropriate product. Weathered or grey timber should be chemically treated and/or sanded to remove dead fibers, exposing fresh timber before oiling. Sand to the desired finish removing all old varnish.

Caution: Oily rags may self-ignite. Do not throw into rubbish bin. Soak rags in water and hang out to dry.

Disclaimer: The information concerning the use of the product is given in good faith. Because we cannot control the way this product may be used or the conditions that it may be exposed to we can give no express guarantees in respect of this product or its performance. Neither the seller nor manufacturer shall be liable for any injury, direct or consequential, arising out of the use or inability to use this product.

Developed and Made in NZ from local and imported products.

Please see other listings for more products:

Boiled Linseed Oil Garden Furniture Oil Clear and Kwila Haarlem Danish Oil Pure Tung Oil Shellac Amber Flakes Tung Oil Blend Vegetable/Gum Turpentine

We can not deliver to PO Box's http://www.supremeoils.nz