An economical, easy to apply, solid colour Fence Finish, able to be applied to all types of timber fences. Available in four high coverage popular colours that are durable and easy maintained. Usually one coat will cover but two are recommended for evenness if colour and finish. Physical Properties:

• Resin type: Acrylic emulsion
• Solvent: Water
• Colour: Redwood, Charcoal, Mission Brown, Karaka.
• Finish: Low sheen to Matt
• Drying Time: Touch; 30 minutes, Overcoat in 2 hours
• Theoretical Coverage: Approximately 8 M²/lt. depending on porosity.
• Dry film thickness: 30 microns at 12 M²/lt.
• Thinning and cleanup: Water Application: Fence Finish may be applied by Brush, Roller or spray. Do not thin more than 5% with water. Stir thoroughly with flat stick until contents are evenly mixed before use, and occasionally when using to keep pigments evenly distributed.