Full warrenty and GST recipt supplied RRP $ 2,399.00

Temperature controlled continuous flow condensing gas hot water system for external domestic

SUITABILITY For homes (up to two bathrooms) and manifolded commercial applications, where high efficiency, lower gas emissions and subsequent energy savings are important.

• Dimensions: H-600mm, W-350mm, D-277mm
• Hot Water Capacity: 2.3 to 30 litres per minute
• Nominal Water Capacity: 24 litres per minute at 25C rise (1440 L/h)
• Factory Preset Temperature: 55C
• Input: 162 MJ/h or 45kW (max)
• Output: 43kW
• Efficiency: 95% Exhaust System Forced flue Ignition System Direct electronic ignition

Line Pressure (Min) NG 1.13kPa LPG 2.75kPa

In the case of commercial metering (i.e. 35-37kPa coming in), there may be a requirement to regulate the incoming pressure down. Power Consumption Normal = 50W Standby = <3W (with one remote control) Automatic Frost Protection = 125W Pressure Relief Valve opens at 2060kPa Valve closes at 1470kPa Noise Level 46dB(A) NOx af <60ppm Safety Devices Flame failure Boil-dry protection Overheat protection (OHS) Overheat protection Fusible link Combustion fan rpm check Over current Flame rod Water flow sensor 97C bi-metal switch 95C lockout thermistor 129C thermal fuse Integrated circuit system Glass fuse (3 Amp)

Water Flow Water flow sensor, electronic water flow control device and electronic by-pass flow control device Water Supply Minimum operating pressure Minimum water flow 200-1000kPa 2.4 litres/min

Weight 27kg

This appliance must be installed by a licenced gas fitter Instalation can be arranged on request DO NOT ask for cost of instalation unless i can look at the job first

Please check my other listings for differant models or if you can't find what your are after please ask