IT ADDS UP TO CHOOSE TESTNTOOLS
+ Friendly service, fast delivery
+ GST invoice always supplied
+ See our profile for the good stuff
+ Check our feedback, we look after you!
______

UPGRADED MODEL WITH MAGNETS ON BOTTOM

The GemRed digital protractor (also known as an inclinometer, essentially a digital spirit level) provides angle readings through 360° degrees with a resolution of 0.1° degrees. Now it's easy to measure angles relative to horizontal or any desired angle (floating zero). This is a great tool for setting up work in your milling machine or shaper and for general use by builders, engineers, technicians etc.

The precision extruded aluminium frame with v-groove ensures it sits flat against any surface and easily locates on pipe and tube. The base magnets will hold it to ferrous materials. When used upside down the display automatically flips for easy reading.

ABSOLUTE MEASUREMENTS
Used to find the levality of surfaces as you normally would with a traditional spirit level. This mode is for checking roof slopes, picture hangings, fence posts, kitchen benches, roll cage angles, road cambers etc.

RELATIVE MEASUREMENTS
Set any angle as zero and from that reference point you can take relative measurements. For instance you may want a surface that is 25° degrees off the horizontal displayed as 00.0° so you can measure all other angles from that datum. Good for checking wheel alignment and drive shafts etc.

SPECIFICATIONS AND FEATURES
Range 4 x 90° degrees (0-360° degrees)
Resolution 0.1° degrees
Accuracy 0-90° =0.1° (else =0.2°) degrees
Large 12mm LCD display
Automatically flips display upright
Plus and minus angle indicators
Display hold button for awkward spots
Powered by 3V CR2032 battery supplied
Battery life 2000 hours continuous use
Auto-power off 5 minutes
One time calibration
Dimensions 151W x 60H x 34D mm
Weight 295g

SUPPLIED WITH
Battery
Instructions
Vinyl case with belt loop

12 MONTHS WARRANTY