BIDDERS ONLY

FRE 301 Laser Level Set A great new laser added to our range. Watch clip at... http://youtu.be/SDXeCkHfLHk

Features: For Indoor & Outdoor use with a 635nm, class II visible red laser output IP RATING ( IP 64 ) dust and splash Proof Self-levelling both horizontally & vertically Up dot for setting Plumb & groundwork squaring Accurate 3 axis electronic sensor IR control via handheld Remote Anti-Drift system (Bump sensor) Dual Grade & SCAN facility Auto shut-off - if instrument goes outside of its levelling range Low battery indication Rechargeable battery system Full 12 months parts & labour Warranty

You have the facility to totally stop or move the red dot slowly in either direction using the remote control. Rotational speed is adjustable in 4 increments up to max. of 600 rpm. For Indoor use, the SCAN facility comes into its own. This enables the User to stop the dot, then make it oscillate as a short intense red line in one area of the room only. Left/right keys on the remote control moves this laser line to the exact area of working. A really useful feature. Grading: You can keep XX axis auto level, whilst setting a Grade (tilt angle) on the YY axis. This is helpful for setting falls of drainage, car-parks & access ways. Or you can set grades in both axis together (ie. DUAL Grade facility).

Additionally, a perfectly plumb laser dot is generated above the instrument via the prism system. With the instrument set on its side to spin vertically, this dot can be used to set 90 degree right angles for groundworks Squaring etc. Specification: Horizontal accuracy: +/- 3mm over 30 metres (+/-20 arc seconds) Vertical accuracy: +/- 3mm over 30 metres (+/20 arc seconds) Auto (self) levelling range: +/-5 degree (instrument will auto level on a surface within 5 degrees of true level) Measuring range: 300 metres diameter (using the supplied laser detector)

a set consists of tripod staff laser level detector remote and case

Level can be purchased separately on request