This is the basic model BevelBox, see our other products for more bells and whistles.

The BevelBox is a mini digital protractor (inclinometer, or digital spirit level) that provides angle readings between ±180° with a resolution of 0.1° degrees. Use it to accurately set cutting angles on your your compound mitre saw, jointer, table saw, milling machine table etc.

Just place it on the flat surface of your equipment and press the zero button. Then attach it to the saw blade or jointer fence, the 3 magnets on the bottom hold it in place. Now you can set your machine to the angle you want.

SPECIFICATIONS AND FEATURES Range ±180° degrees Resolution 0.1° degrees Repeatability ±0.1° degrees Large 10mm LCD display Plus and minus angle indicators Powered by 3V CR2032 battery supplied Base magnets for easy mounting Auto power off 5 minutes Dimensions 50W x 50H x 33D mm Weight 120g

SUPPLIED WITH Battery Instructions Vinyl case with belt loop

12 MONTHS WARRANTY

IT ADDS UP TO CHOOSE TESTNTOOLS

• Friendly service, fast delivery
• GST invoice always supplied
• See our profile for the good stuff
• Check our feedback, we look after you!