Evanson Power chief radial arm saw.

3 Hp (2.2Kw) 3 phase motor Air over oil variable / adjustable feed rate - needs compressed air or alternatively this option can be disconnected and manual feed can be used.

Saw blade diameter 340mm tungsten tip - for cutting aluminum with lubricant feed to the saw blade while the saw moves forward (only when air feed is used ).

Blade cross cut travel is 440mm with cutting depth (adjustable 0 to 90mm) of up to 140mm.

Saw arm is adjustable (rotatable +60 degrees to -60 degrees on the horizontal

Dimension of saw 1.20m x 0.610m wide. Buyer would need to supply input / output benches to the saw.