1 x Nukor NKF-18C Compressed Air Line Filter body and carbon element.

Larger units available.

Running a compressed air system without proper air filtration and drying can lead to air contaminated by oil, water and dirt resulting in severe damage to air tools, reduced life of pneumatic rams and solenoids, contaminants in spray coatings and a whole host of other problems.

The Nukor range of air treatment filters and dryers eliminates the risks involved with running a contaminated air system and gives you peace of mind that your system is being supplied with clean, dry air.

All Nukor's compressed air filters feature a corrosion free, anodised all aluminium body complete with differential pressure gauges, high efficiency filter elements and automatic condensate drain.

Available with Particulate, oil/water coalescing and carbon filter elements.

Element grades available are:

NKF-A: High efficiency general purpose protection. Particle removal down to 1 micron, including water and oil aerosols. Generally placed before a refrigerated dryer. Filter Micron: 1 Residual Oil Content: 0.5mg/m3 Dry Pressure Drop: 0.07bar Wet Pressure Drop: 0.14bar

NKF-B: High efficiency oil removal. Particle removal down to 0.01 micron, including water and oil aerosols. Generally placed after a refrigerated dryer and NKF-A filter. Filter Micron: 0.01 Residual Oil Content: 0.01mg/m3 Dry Pressure Drop: 0.1bar Wet Pressure Drop: 0.2bar

NKF-C: Oil vapour and odour removal by activated carbon. Must be placed after a NKF-B filter. Residual Oil Content: 0.003mg/m3 Dry Pressure Drop: 0.2bar Wet Pressure Drop: 0.3bar

Additional elements can be purchased separately.

NKF-18C Filter body specifications: Rated Flow: 1.8m3/min or 63CFM Height: 193mm Diameter: 89mm Port Size: 1/2" BSP Weight: 1.5kg

Supplied with GST invoice and 12-month warranty.

Note: Picture shows 2 x NKF-18C units with joining blocks. Auction is for 1 unit.