Demountable units are supplied in 5 sizes (2,25m, 3m, 4m, 5m, 6m) PLEASE SEE THE PIC 11 FOR SIZES

EXTRA HEIGHT 2600mm CONTAINERS ARE ALSO AVAILABLE...PLEASE SEE PIC 12

and consists of the following parts:

FLOOR Wooden planks 35 mm thick bolted to galvanized steel supports of galvanized steel 2 mm thick. Sides of the floor are fixed to horizontal steel supports, which are made out of galvanized steel 1 mm thick.

SIDE WALL Corrugated galvanized steel 0,75 mm thick.

BACK WALL Corrugated galvanized steel 0,75 mm thick.

ROOF Corrugated galvanized steel 0,75 mm thick. Side supports of the roof serve as gutters.

DOUBLE – DOOR Both wings are made out of 0,75 mm corrugated galvanized steel. Frames are made out of 1 mm thick galvanized steel. The door is secured by a pull draw lever, door handle, lock with plug and prevention against buckling. The door wings are atached to the frame with hinges. The frame is constructed of 2 mm thick galvanized steel supports. Each door wing has a door stopper 400 mm long.

CORNER ANGLE 3 mm thick steel. It is galvanized and powder coated. The corner angles are used to join parts of container (floor, side walls, extentions of side wall, roof) to transport position and for assembly. Two outside corner angles are provided with pegs which are used for stacking containers in the transport position.

ACCEPTED surface weight limit of floor – 500 kg/m2

WEIGHT LIMITS for handling container - 1500 kg with crane 3000 kg with fork lift

Entrance doorway to container, when door is open, is 1930 x 1930 mm in all types of containers.

EXTRA ACCESSORIES AND EQUIPMENT : Shelving, roof stiffening , Extension, roof with 770mm wide lighting strip, connection of 2 containers, air grillers, fork guides, vandal bar, single sheet door, door with wire mesh, door stopper, window, drive in ramp.