Aerocool Dead Silence Series(DS200) Premium Gaming Chassis:

Features:

1. Super-Silent mid tower gaming case solidly built with 0.8mm steel to block out most of the noise.
2. High quality noise insulator on both side panels to further reduce noise.
3. Leather coated front and top panels with smooth surface finishing
4. Built-in fan controller on top panel:

• Controls a combined fan power of max. 25Watt with 4 speed settings (stop/low/mid/high).
• 7 backlight colors selection.
• Case temperature display (Celsius or Fahrenheit).

1. Removable 3.5” HDD cage supports long graphic card up to 410mm.
2. Supports either 240mm or 280mm water cooling system on both front and top panel.
3. Supports max. CPU cooler height of 170mm.
4. Supports max. PSU length of 220mm.
5. Removable PSU dust filter.
6. Shock-proof rubber for 3.5” & 2.5” HDDs and PSU.
7. Pre-drilled holes for cable management to reduce cable mess.
8. Supports up to 5x3.5” HDD or 7x2.5” HDD/SSD installation.
9. Install up to 2x12cm or 2x14cm or 1x20cm fans on top panel 2x12cm or 2x14cm fans on front panel and 1x12cm fan at rear of case.

Specification: Material: 0.8mm Motherboards: ATX/Micro ATX/Mini ITX Chassis Dimensions: 210 x 527 x 485mm Drive Bays: 5.25" bay x 2 (Exposed) 3.5" FDD bay x 1 2.5” Drive Bays x 2 (Internal 2.5” HDD Tray) Expansion Slots: 7 Max length space available for PCI slots: 290mm (410mm – Without 3x3.5" HDD Tray) I/O Ports: 2 x USB3.0 2 x USB2.0 HD Audio + Mic 1 x Temperature LCD display and Fan Controller Height limit for CPU coolers: 170m

Cooling System(Front/Rear): Fan: 140 x 140 x 25 mm 120 x 120 x 25 mm Rated voltage: DC 12V Operating Voltage Range: 7~13.2V Starting voltage: 7V Power consumption: 1.44W+10%Max Rated current: 0.12A+10%Max Speed: 800±10% RPM Air Flow (CFM): 39.4CFM 37.4CFM Air Pressure: 1.52mm-H2O 1.32mm-H2O Noise (dBA): 28.5dBA 25.5dBA MTBF: 20000hours

• Brand New NZ Local Product, 12 Months Official Warranty.
• Other PC components are NOT included.