Brand New Arctic F9 PWM 92mm Case Fan

• Retail Packaging with full NZ warranty

http://www.arctic.ac/worldwide_en/arctic-f9-pwm.html

Long Service Life The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life

Perfect Case Fan Regulation with PWM The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Innovative Design Enables Quiet and Efficient Ventilation The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.

Two Way installation Blow warm air out of the case Draw cool air into your case

Specifications Performance Fan Speed: 550 - 1,800 RPM Noise Level: 0.4 Sone Air Flow: 31 CFM / 52.7 m³/h

*The minimum speed is tested based on a duty cycle of 20% Electrical Requirements Voltage

Typical voltage [V] Minimum voltage [V] @ 20% PWM 12 V 8.5 V Current

Typical voltage [12V] Maximum voltage [13.2V] Minimum voltage 100% PWM 20% PWM 100% PWM 20% PWM 100% PWM 20% PWM 0,15 0,02 0,17 0,02 0.11[@8.5V] 0.01 [@8.5V] Motherboard: +12V DC PWM control signal 4-pin socket

Size & Weight Standard 92 mm fan holes