HP L1740 Flat Panel Monitor

Active Matrix TFT (thin film transistor)
faceplate treatment
Anti-glare and anti-static coatings
Display size
17 inches diagonal
Viewing angle:150° horizontal, 135° vertical
Brightness:300 nits
Contrast ratio:500:1
Refresh response time:8 ms
pixel pitch:0.264 mm
Colors:16 million colors
Display, Maximum Pixel Rate:140 MHz
Scan rates:Horizontal frequency: 30-83 kHz, Vertical frequency: 56-76 Hz
Resolution
1280 x 1024 @ 60 Hz (analog and digital)
Recommended resolution
Max Resolution (analog and digital): 1280 x 1024 @ 75 Hz; Preset VESA Modes (non-interlaced): 640 x 480 @ 60 Hz, 72 Hz, 75 Hz - 720 x 400 @ 70 Hz - 800 x 600 @ 60 Hz, 72 Hz, 75 Hz - 1024 x 768 @ 60 Hz, 70 Hz, 75 Hz - 1280 x 1024 @ 60 Hz, 75 Hz; Preset MAC Mode: 832 x 624 @ 75 Hz - 1152 x 870 @75 Hz; Preset SUN Mode: 1152 x 900 @ 76 Hz
Video input connector
Two connectors: one 15-pin mini D-sub analog VGA and one DVI-D (VGA analog or digital)
Input signal
15-pin D-sub mini connector, detached
User controls
Size and positioning, contrast, brightness, clock, clock phase, selectable color temperature, serial number, mode displayed, sleep timer, input selection, factory reset, individual color contrast, full-screen resolution
Bezel width
17 mm left and right, 17 mm top, and 24 mm bottom
Mounting interface
VESA Mounting Support: standard 4 hole pattern, 100 mm; base must first be removed
External I/O Ports
USB 2.0 Hub: Self-powered, one upstream, two downstream ports (cable included)
Control Panel
4-button OSD (auto-adjust, menu, minus, plus); power on/off; second-level OSD buttons include dual-input switch
Internal Audio
No audio included at platform level
Power Consumption description
60 watts maximum, 40 watts typical, 33 watts average (when displaying standard office applications)
Power Requirements
Auto-ranging, 90 to 265 VAC, Internal power supply (built-in power supply)
Power Consumption, Standby
2 watts
Unpacked: 7.0 kg, packaged: 8.8 kg