Advantages of PETG:

Odorless; Little shrinkage rate; hydrophobic:- does not absorb water and as such clog the extruders; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; High transparency; Good gloss; Recyclable.

According to ESUN's R&D members, PETG is an excellent material which combines the advantages of both PLA and ABS. Its material shrinkage rate is very low during printing.

Printing parameters: Print temperature: 235255°C Plate temperature: 8090°C or without heated

All products here http://www.esun3d.net/products/176.html please let us know if there is a product you would like to try.

Free Filament Sample We are giving away a 10M sample length of one of the following please request with your order.

PLA Natural 1.75mm PLA + Green 1.75mm ABS Black 1.75 PetG Natural 1.75 ABS+ Pine Green 1.75

Or a 5M sample of the following

Colour Change via UV Red 1.75 Colour Change via Temperature Blue 1.75 ePC Polycarbonate 1.75 print temp 250 Deg C

We have the following 1.75mm in stock PLA Black | Blue | Glass Purple | Grey | Luminous Blue | Natural | Purple | Red | White | Yellow | luminous blue |Glass Watermelon Red | Glass Orange | Glass Lemon | Yellow | Glass Light Blue Light blue | Green | Luminous green | Orange | Silver | Blue | Pine green | Gold | Magenta

PLA + Black | Green | Lt Blue | Orange | Pine green | Yellow

ABS Black | Blue | Green | Natural | Orange | Pink | Purple | Red | White | Yellow | Pine Green

ABS+ Black | Natural | Pine Green | White

PET-G Natural | Solid Black | Solid Red | Solid White| Blue | Yellow | Solid Grey | Solid Yellow

Specials copper | Colour change Temperature | colour change UV | EFlex | Poly Carbonate | Wood fill

3mm filament in stock PLA Black | Grey | Blue | White

Note some of these items may be out of stock for a short while