New item
Add this item to Cart for a combined free shipping deal
Click to enlarge photo

Listing Detail Tabs

Gemcoat casting resin epoxy
This Auction is for a 375ml pack 2.1 resin to hardener
Also available 750ml Pack $42.00
1.1.5litre pack $75.00
Wanting to add inlays to your woodturning and craftworks , joinery finish table tops ,bar tops
Then this non- yellowing crystal clear reason is what I’d suggest to inlay the likes of shells,or any other medium that will enhance your turning.
Alby Halls Pieces from the Ancient kauri Kingdom have always enticed concerning buyers.
This is the product he uses
Composition and Properties
• GEMCOAT ES 2:1 LV is a low viscosity epoxy resin formulated for use as a hard, resistant,
clear sealer for timber and other substrates (consult GemCo).
• It is particularly suited to filling cavities up to 20mm deep in one pour due to its air release &
low viscosity
Physical properties
• Odour: low odour
• Flammability: non flammable
• Coating Type: Epoxy
• Packaging: 750ml 1.5L,6L, 30 litre two part pack & 200L drums
• Mix ratio: 2:1(base : hardener)
• Pot Life: Approximately 30 min @ 20 °Celsius (200g mix)
• Coverage: 1 sq metre/litre @ 1 mm thickness ( typical - depends on substrate)
• Dry to Recoat: Typically overnight - will vary according to temperature &
humidity.
Preparation
• A test patch is recommended on a new substrate or if the product has not been used before.
• All surfaces to be clean, dry, and free of loose material
• Thoroughly solvent wipe wooden surfaces to remove any oily deposits and allow to dry.
Application
• For best results store , apply, & cure resin at temperature of 25 ° C.
• Add 1 part hardener to 2 parts base (by volume) and thoroughly hand mix .
• Hand mix small quantities with a stick taking care to scrape sides & bottom of container then
allow to sit for a few minutes for air to come out
Timberly agent for Gemcoat,casting resins
We stock an extensive range of:
Star bond Ca glues and accelerators
Tite Bond Glues
Sanding sealer
Lacquer spray finish
U-Beaut shella wax and finishers
Teknatool wood lathes
There were no answered questions or comments placed on this listing.
Your question and answer privileges have been disabled.
You must log in to view questions and answers on this listing. We recommend reading questions before you make any purchases.
Please log in to view questions and answers on this listing. We recommend reading questions before you make any purchases. Available only to approved bidders. You must be an authenticated member to ask questions Find out more about becoming authenticated. Your account is in debt Your current account balance is You must credit your account to use this feature.
Firearms Licence #
By entering my licence number, I confirm I am aware of my obligations under the Arms Act.
Transaction details may be provided to police in accordance with the Terms & Conditions.
Your current account balance is Please note you will lose your question and answer privileges if your account is in debt for more than 2 weeks. Credit your account.
I confirm that I am over 18 years old.
To prevent your personal details being misused please do not put emails or phone numbers in questions. Failure to comply may result in the suspension of your account. The seller cannot add a Buy Now price once bidding has started.

Shipping options

  • Anywhere in New Zealand standard post$6.80
  • Anywhere in NZ rural delivery$9.80
  • Seller allows pick-ups
  • Seller location: Papakura City, Auckland, NZ

Payment options

  • NZ bank deposit
  • Cash