Dust Extractor Record Power RSDE1

Record Dust Extractor 45L One of the Lowest decibel units on the market Ideal if limited by budget or if a dedicated extractor is required for a single machine. If usage changes over time there are a wide range of accessories available to increase functionality.Ideal for wood turners with limited space The Record Power RSDE1 is a high filtration extractor designed to filter down to 0.5 microns to minimize the amount of harmful dust in the workshop. Particularly useful for fine dust producers such as saws or sanders.This is a compact but powerful machine ideal for workshops with limited space or budget. HPLV = High Pressure Low Volume System HPLV extractors move less air at a much higher pressure. Operating more like a standard vacuum cleaner, they are better adapted for continuous use and have a much bigger waste storage capacity than domestic cleaners. They can usually collect dust down to 0.5 - 1 microns and are better suited for enclosed areas where the air is constantly recycled as in the home workshop. The most portable are the canister type with 100mm hose or vacuum cleaner type with small-bore hose, featuring a powerful through-flow motor surrounded by a cardboard filter which is then covered by a paper filter bag; this gives two levels of filtration. The other major advantage of using HPLV extraction systems that the high pressure low volume makes it very efficient at removing fine dust waste such from Bandsaws, Sandblasters, Scroll Saws, Sanders, and Power Tools . As this system allows you to reduce the intake hose from 100mm to 32mm without losing too much efficiency. Features 1000W 240V motor 45 Litre steel tank Ø100mm Hose 0.5 Micron Filtration - Ideal for all types of wood dust and even MDF.

Note Only to be used for wood related products only. Not Gib or concrete dust Size: L360 x W530 x H620mm