The Battery Grip was designed specifically for Cannon EOS 20D/30D/40D/50D It can put 2 x BP-511 (lithium batteries) or 6 x AA batteries in The LCD Timer Battery Grip matches for capital having the direction location body release, drive plate, AE locks/ FE locking a button---

Details: The LCD displays information you need in timer photography, and LCD background light assists you work in dark circumstance NOTE: The handle can only be used with compatible devices In order to prevent physical access to the power terminal of metal caused a short circuit, do not use the handle, please cover Interface cover The handle does not equipped with power switch, use the camera power switch on or off the power The battery pack into fire or water, or directly to output short-circuit the battery pack Do not break down or assemble the battery pack Please use the specified charger to charge Independent place or time do not, remove the battery box battery Usage: Determine the camera's power switch has been set in the closed position, open the camera's battery compartment cover to carefully pull out the 35-degree angle, the camera battery inside the battery compartment out. To avoid dropping the battery can be up to the battery box cover is opened Camera battery box cover is stored in the handle of the camera battery compartment cover storage place to prevent loss Insert the handle column electrodes camera battery room, and to link the camera tripod screw toward the screw, according to tighten the connection as shown in the direction of hand wheel. Found between the camera body and the handle virtual spaces, you need to reinstall the handle Thus all the setup all finished. Open the camera power switch, and make sure the camera body there is information on the LCD display before use Installation steps can be removed in the opposite handle

Included 1 x LCD Timer Control Battery Grip 1 x User Manual 1 x Li-ion Battery Holder 1 x AA Battery Holder

Note: Auction does not included battery!