Wireless Shutter Release for K100D K10D K20D, Canon EOS 650D 60D 70D 550D 500D 700D 1000D 1100D 600D 450D 400D 350D 100D 1200D etc

Introduction This wireless shutter release remote switch has strong anti-interference function and has 16 channels for you to choose. It is extremely useful if there are several photographers working nearby. Each could choose their own channel to trigger off the shutter release of the camera they are going to use without triggering others because of overlapping signals. You also can control more cameras with the channel switches on the transmitter and the receiver, and extra receivers if you need.

Wirelessly Trigger Your Shutter Two-Level Shutter Button, Autofocus, Continuous Drive & Bulb Mode Supported Too!

You can activate autofocus, release shutter, activate continuous drive mode or keep the shutter open for bulb photography as well.

How to Use? With the shutter button on the remote control, you can do the followings:

Autofocus: Press it halfway to activates auto focus (Indicated by Green LED)

Release Shutter: Press it all the way to release shutter and take pictures. (Indicated by Red LED)

Continuous Drive:

1. Switch the camera to continuous drive mode.
2. Press it all the way to release shutter continuously.

Bulb Mode:

1. Switch the camera to Bulb mode.
2. Press it all the way for 3 seconds until the Red LED on the remote control goes off.
3. The receiver is in bulb mode now. (Indicated by Red LED on the receiver)
4. Press the button again to close the shutter.

Avoid Camera Vibration=Sharper Pictures! Since you can trigger the shutter without touching the camera body, it can avoid camera vibration, thus resulting in sharper pictures.

Compatible with Canon EOS Canon EOS 650D 60D 70D 550D 500D 650D 700D 1000D 1100D 600D 450D 400D 350D 1200D Canon EOS 30 33 50 50E 300V 300 3000 60D 100D

CANON Powershot G11 G10

Pentax K-7 K10D K110D K100D K20D K200D Cs205