Aftermarket Timer remote control for Canon

The Digital Timer Remote Control is a professional grade time designed for precise control over scheduled shutter release, exposure length, frequency and many more functions. It provides delayed shutter release to the second, intermittent release, time exposure and continuous shooting to preset limits. The time can be preset from 1 second to 99 hours. Settings are viewed on an LCD screen. A dial enables you to easily enter numeric settings with a single thumb. The LCD panel can be illuminated.

1. Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds.
2. Interval Timer (INTVL) The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.
3. BULB/Long Exposure (LONG) It allows you to take time exposures up to 100 hours long.
4. Exposure Count (N) This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times.

Product Features:

-Self-Timer: 0s to 99hrs 59min 59s in one-second increments -Interval Timer: 1s to 99hrs 59min 59s in one-second increments -Long-Exposure Timer (Bulb-mode): 0s to 99hrs 59min 59s in one-second increments -Exposure Count: 1 times to 399 times. -Size: 154mmL x 40mmW x 18mmH (6.1'' x1.6''x0.7'') -Cable Length:920mm -Power Supply: AAABattery1.5v (Not included)

Compatible with: Canon EOS D30 D60 Canon EOS 10D Canon EOS 20D Canon EOS 30D Canon EOS 40D Canon EOS 50D Canon EOS 5D Canon EOS 7D Canon EOS 5D mark II, Canon EOS 1D, EOS 1Ds Canon EOS 1D MarkII, EOS 1Ds MarkII Canon EOS 1D MarkIII, EOS 1Ds MarkIII

Package Content: 1 X Timer Shutter Release Cord 1 X English Instruction Manual