18V pocket headphone amplifier with Bass Boost fitted in a cool Altoids tin.

This portable amplifier is built on a custom designed PCB which is professionally made.

Based on the popular Chu Moy amp design.

This amp is a cheap but quality alternative to commercial amplifiers and is an absolute must for high impedance headphones such as the Senn HD600 .

Or just not getting enough volume with your headphones? this is just what you need!

A bass boost switch can be found once the tin is open, toggling it amplifies all frequencies below 150 Hz by +3db per decade. Perfect for bass heads!

This amp is equipped a 10k Alps rk097 pot to act ast the volume control and on/off switch.

Wima 0.22uF Polypropylene film capacitors (best for audio) used for the input cap.

This pocket amp allows op-amp rolling so if you want a different sound signature, just get another opamp and you have a whole new amplifier!

Comes with an default Texas instruments TLE2082 op-amp chip. Other opamps available on request e.g. the OPA2134 and AD823.

Upon buying the amp you can chose the colour of your tin. Currently 3 colours are available: blue (wintergreen), maroon (cinamon altoids) and gold (ginger) tins.

3.5mm input and 3.5mm output.

Batteries, phone, headphones and 3.5mm to 3.5mm cable not included in auction,

This amp is suitable for all high end headphones including Sennheiser , Grado , AKG , Beyerdynamic , Audio Technica and etc.

BUY NOW to get 2x 9V batteries and 3.5mm to 3.5mm cable free!

Check out the my feedback to see what others have thought about this amp