Applications:

• It is suitable for Automotive / Electric Cars / Motorcycles battery monitoring or for voltage and current measurement of other products.

Working Conditions:

• Supply Voltage: DC 4.5V - 30V
• Working Current: = 20mA
• Working Temperature: -15 °C - 70 °C
• Operating Humidity: 10- 80% (non-condensing)

Technical Parameters:

• Test Voltage Range: 0 - 100V with minimum resolution of 0.1V
• Test Current Range: 10A - 0.01 mA (built-in crossover)
• Dimensions: 48 × 29 × 21mm
• Installation Hole: 45.5 × 26.5mm
• Display: 0.28" LED
• Measurement Rate: =300mS / times
• Accuracy 1% ( ± 1 word)
• Monochrome (All Red), (All Green), (All Blue), (All Yellow)
• Two-color (Red and Blue), (Red, Green) etc can be according to customer requirements color.

Features:

• The dual color table compact, can simultaneously with the screen display of voltage, current , with fine-tuning function
• You can display the measured values ??finest.
• The meter uses a common design, namely the supply end of earth ground measurement end is the same.
• This meter has five wires for easy connection to car, car batteries, motorcycle-car line
• For monitoring the battery voltage, battery voltage to grasp the state can also be used for other products voltage and current measurement.

Note: The maximum input voltage should not exceed 30V otherwise it may harm the device.

Package Includes: 1 x Voltmeter LED 30V 10A