Yaesu ATAS120 Screwdriver antenna & 80 Metre coil

Yaesu ATAS 120 Screwdriver antenna - in as new condition. 40 metres to 70 cm continuous tuning.

Includes an 80 meter base loading coil. The ant works on 80M with this coil and I have tested it manually so needs a change over relay to switch in the 80m coil. ATAS 120 screws into the top of the 100mm dia 80m coil. NB 80m coil not shown in photo

ATAS-120 Active Tuning Antenna System for FT-857, FT-897, FT-847, FT-100/D

* Frequency range: 7/14/21/28/50/144/430MHz
* Max input power: 120W (A3J)
* Input impedance: 50 Ohms
* Matched SWR: < 2.0:1 (with proper counterpoise)
* PL-259 plug for SO-239 base
* Solid 'trombone' sliding sections
* 20% faster than ATAS-100
* Size 1.4-1.6m
* Weight 900g
For use with FT-857, FT-897, FT-847, FT-100/D

The ATAS-120 mobile antenna system is designed for use with Yaesu transceivers equipped with the ATAS system ( Active Tuning Antenna Systsem). These Yaesu transceivers are the FT-857, FT-897, FT-847 and the FT-100/D. The ATAS-120 utilises a motorised tuning system which resonates the radiating element for the lowest SWR using control voltages sent to ther ATAS-120 via the coaxial cable connected to your rig so no antenna tuner is required. The ATAS-120 is designed to mount directly onto a standard SO-239 mobile antenna mount (not supplied).