All prices quoted in this ad are in NZ dollars.

I have a NZ based bank account (with ANZ NZ) which means payments can be made conveniently in NZ Dollars.

I am Australia's leading online retailer of Amateur Radio Gear and related equipment - buy with confidence - refer 100% Trademe feedback

RADIOS-NET-AU ABN 91506699481

This product is brand new in unopened box with 12 month warranty applicable

The Yaesu FC30 Tuner is designed for the FT 897 and FT897D (but also works with the FT857 and FT100 series) and bolts to the side of the radio. It covers 1.8 - 30 and 50 - 54 MHz, handling up to 100 watts with a VSWR of 1.5:1 or less. Tuneup power is 4 to 60 watts and tuning takes 5 seconds or less. There are 100 impedance matching memories. This tuner pulls the required 13.7 VDC directly from the transceiver. The impedance matching is 16.5 to 150 ohms and accordingly, the FC-30 should not be expected to match "long wire" type antennas unless specific steps have been taken in the design of the antenna to insure it is within these specifications. Internal DIP switches permit you: to clear memories and/or have the tuner operate during receive. The FC-30 comes with a 2 foot (0.45m) coaxial cable, 2 foot (0.45m) control cable and mounting screws. Size: 3.1 x 1.8 x 10.2 inches 2.2 Lbs (80x45x260mm 1 kg).