A retro looking very large Hot Plate preserving pan made by Hard Wear. Needs a good clean, but good and solid. Its really only fault is that the rivets holding the handle plates on the side are quite loose. Still OK, but would be best to have them replaced for safetys sake and ease of operation with holding the handle up etc. (the handle, being steel, has rusted as well, but again, still fine and useable) Do not know the volume, but this looks a bit bigger than the standard sizes. It is quite solid, with good thickish sides compared to the this ones. (not major thick like odd cast ones, but still good enough thickness) It has the thickish bottom, or more thicker than other ones. So there is like two types, the thinner bottoms, and these ones. It weighs approx 2kg (the other pan I have on another auction, with good solidness too, only weighs approx 1 kg, so this is a good size) Measures approx 360mm wide at the rim, approx 255mm wide at the base, and approx 170mm high to the rim. Has the old type handle that can lay flat or stand up by itself. Has a pouring handle & a pouring spout. Because of its size, postage is as below. Thanks. refN19767180