This is the latest LX heater made for whirlpool Bathtub, SPAs, and small swimming pool. It could be connected with the inlet and outlet of the spa pump. When spa pump starts, this heater will start itself. It has an adjustable thermostat (0-45 Centigrade) and 60 Centigrade over-thermal controller, to keep the water temperature within the set temperature.
Heating element: using UL approval metal pipe electric-heating element, Incoloy800 against high temperature and against causticity dedicated stainless steel pipe.
Casing: high reinforce engineering plastic,

Features:

• Large capacities: 2 kW - Fast heating of spas and pools.

• Electric heater made of ABS - Tough and corrosion-resistant.

• Minimum dimensions - Simple installation even when there is little space.

• Equipped with thermostat 0-45°C - Simple setting of required temperature.

• Overheating cutout and flow switch - Dual safety against overheating and a too low water flow.

• Union couplings for Ø 50 mm pipes - For simple installation.

• Certificate - CE European Union mandatory safety certification, TUV German safety certification.

Application:

hydromassage bathtub, SPA large outdoor pool, heating thermostat

Specifications:

Model: H20-RS1
Power: 2.0 W
Voltage: 230VAC
Frequency: 50/60HZ
Current: 9 Ampes

1.5m cable with 3 pin plug (NZ standard)

Pump Inlet & Outlet: 50 mm
Note: The heater must be installed Horizontally.

Happy Bidding!!