This Pure Sine Wave Inverter (a Sine Wave is the NZ mains / Power grid wave shape) is very reliable and is a high quality design. All units are batch tested in our Electronics factory before dispatch and unlike MSW (modified Sine Wave) Inverters they can run almost any equipment designed for use with New Zealand mains (230VAC 50Hz). These are EXTREMELY light and small for pure Sinewave inverters due to the high tech DSP design.
Fluorescent lights, power tools, LCD TVs and many other devices that won’t run well on MSW Inverters, will operate successfully on this very competitively priced Pure Sine Wave Inverter. Guaranteed for 12 months.
*Note: Inverter (AC) outputs are rated in VA(Volts x Amps) not Watts. These are only approximately the same if the load is purely resistive (e.g incandescent light bulbs). For other equipment (e.g motors,solenoids,microwaves etc) VA does not equal Watts and if you are unsure what size Inverter you need, please ask but tell us all the electrical ratings stamped on your device so we can recommend an Inverter without having to guess!

Specifications
Input Voltage: 12Vdc (11V-15V)
Output Voltage: 230Vac 50Hz (+/- 2%)
Output Waveform: Pure Sine Wave
THD (Total Harmonic distortion): <3%
Efficiency: >85%
Quiescent Current (no load): <1.0A
Load Power factor COS theta +90deg--90deg
Output Power (cont): 300VA
Output Power (peak): 600VA (1.5s)
Low Volts alarm: 10.2-10.8Vdc
Low Volts shutdown: 9.5Vdc
High Volts shutdown: 15.5Vdc
Over temperature protection: automatic shutdown
Overload protection: automatic shutdown
Excellent EMC design
Short circuit protection: Fuses
Operating Temperature: -10 deg C - +50 deg C
Operating humidity: 10%-90% RH
Inverter dimensions: 200mmL x 118mmW x 62mmH
Inverter weight: 1.3Kg
Cooling: Fan cooled & electronically controlled
Soft start: Automatic on power up
DC connectors: Round insulated threaded screw type