For auction is a good quality Installation Amplifier, an Australian Monitor Installation Series (also sold by Australian Monitor company) DCM250 which is rated at 250 Watts RMS.

The DCM250 is a high performance 250 watt power amplifier designed to meet the needs of the most demanding sound reinforcement installations and applications. This amplifier is designed to operate from both AC mains power as well as 24 volts DC.

Details :

Overload Protection
Overdrive Protection
Built-in compressor/Limiter
Generous Heat-sinking and Fan Cooling
Built-in Trickle Charger for maintaining charge state of a 24 volt battery when connected to the mains power.

Specifications :

250 Watts into 100 volts line or 4 Ohms
Frequency response - 50Hz - 15Khz into 100v or 4 Ohms
THD - Less than 0.5%@1Khz distortion at max level
S/N Ratio - -82db
Input Sensitivity - 300mmv
Input Impedance - 10 KOhm
Power Consumption 400 watts max
Dimensions - 483mm W x 310mm D x 88mm H
Weight - 15Kg
_______________________________­_____

An AMIS DCM series mono amplifier.

This 19inch, rack mounting amplifier is technically in excellent condition. The front panel is in "as new" condition. There are only a couple of very minor scratches on the top and bottom panels.

The unit can be powered through either 240 VAC or 24 V DC (as shown in photograph).

Input is XLR socket

Output can be either 4 or 8 ohms or 70 or 100 volt.

10 segment LED VU meter on front panel

_______________________________­_____
This item has been tested to both AS/NZS3760 and AS/NZS4761, electrical safety standards.

TEST Results:Tested positive
_______________________________­­­­­_____

#Please check our other posting for good deal on used desktop computers and laptops.
#Pickup: 11AM ~ 5PM.(7days a week)
#Location: Honan pl, Avondale.
#We're NZ registered LTD company and GST invoice included all of the sales.
#Please note our pickup address will be in the payment instructions