RTF Red Arrow BAE Hawk 4 cell version

This is the upgraded 4 cell brushless version of the Red Arrow RTF kit, complete with all required RC gear and a 30C lipo worth $98.00 included

We also have 3cell out-runner versions and their fibreglass verion.

They have gone to a 3500 KV motor with a 30Amp ESC and a 4 cell lithium. The Fatory lithium is only 15C and not suitable, Only a 30C contiuous is to be used with this rig and we supply one in the kit.

The Red Arrow is suitable for an intermediate to experienced flyer.
The stability is outstanding at high or low speed. It is lighter than most similar sized models and performs every manuvour posible without rudder.

The glide is extremely stable even at low speed which makes it very easy to land.
It can do loops, inverted flight, rolls and other aerobatics with ease.

The entire fuselage uses a modular structural design, assembly is simple, with easy maintenance.

Specifications:
4 Channel PPM RC system includes 3 x 8g servos, 1 x 6 channel Rx
Dual rates on 1, 2 and 4, servo reversing on all channels and mixing on 1 and 2.
ESC: 30amp programmable brushless ESC
Motor: B2040 In-runner brushless Motor KV3500 with heat sink
This setup requires and comes with a 30C 4 cell 1200 lithium by Poly Quest. We do not recommend using lipos that are lower than 20C on EDF jets and this one must use a 30C.

Fan: 6 blade 64MM
Length: 1000mm
Wingspan: 950mm
Wing area: 18sq.dm
Wing Loading: 36g sq.dm
Flying Weight: 620g

What's in the box:
Complete Red Arrow BAE Hawk.
Motor, ESC and fan are all pre-installed.
Undercarriage with steering.
Full set of 4 channel radio gear with a 6 channel receiver and 3 micro servos.
English instruction manual.
Flight Sim disk and lead for the transmitter.

Please note
Transmitter needs 8 x AA batteries (not included)
This model is not for beginners

Warranty on running gear is 3 months as long as there is no sign of misuse, this is to be assessed by the manufacturer, and we handle this for you.