Rock Racks are manufactured by Ayers Industries right here in NZ. Our racks are all built from thicker steel and are alot stronger than the cheaper racks on the market. Rock racks also all feature the unique cradle shaped prong system.

This model has an offset designed to fit round a spare wheel on 4WD vehicles or to allow the boot to open on sedans and some wagons.

Number Bikes: 4 Arm Width: 410mm (centre to centre) Arm Length: 675mm Height: 875mm (approx) Padding On Arms: Neoprene Swivel Preventing Bracket: Yes

Suitable for 1 7/8" and 50mm towballs Bolts to tow ball with two 12mm Cap Screws. Allum key tool provided.

The main feature that sets this Rock Racks apart from the rest is the shaped prongs. This design creates a cradle like shape and provides great protection from scratching at the front and prevents a bike from falling off the back if a bungee cord or strap breaks. The padding on the main stem gives additional protection to your bike frame.

Arms are locked in place by a 12 mm high tensile pin that locks when arms are both up or folded down.

The rack has a rings at top and bottom to hook support strap and bungy chords etc for securing bikes as well as the swivel preventing bracket to prevent rack twisting on draw bar.

A support strap should be used on any rack carrying 3 or more bikes. The rack itself is easily strong enough but most car tow bars are not so is required to prevent the car tow bar from bending. These are available from Ayers Industries for an extra $20 with Rack.

Ayers Industries are happy to build to your specific requirements so please feel free to ask.

Please visit http://www.rockracks.co.nz for spec sheet on all racks and information on support strap and Bike Ties.