IT ADDS UP TO CHOOSE TESTNTOOLS

• Friendly service, fast delivery
• GST invoice always supplied
• See our profile for the good stuff
• Check our feedback, we look after you!

This is a battery powered high voltage pulse igniter (spark generator) with minimum output of 22,000 volts. Pushing the button generates a strong hot spark making it ideal for a potato gun ignition system.

Two output wires are supplied, one connects to a spade connector underneath and the other can be soldered to the brass tab on the outside of the battery holder or held in place by the button collar nut. If you are using this for a potato gun igntion you'll need to make your own electrodes (from brass rod or similar) with a 10mm gap for the spark to jump across.

ADVANTAGES OVER PUSHBUTTON PIEZO Higher output voltage generates hotter spark Quieter compared to 'clack clack' piezo igniters Continuous spark output while button is pressed

SPECIFICATIONS Output voltage 22kV minimum Recommended electrode gap 10mm Maximum electrode gap 18mm Spark firing rate approx. 9 Hz Mounting hole diameter 22mm Connection wires length 100mm Battery powered 1.5V AA (not supplied) Dimensions 75L x 32W x 74H mm

ABOUT POTATO GUNS Despite what a lot of people think potato guns are NOT illegal in New Zealand but you do need a firearms license to own and use one (a bit of common sense helps too). This applies to combustion type potato guns, i.e. the sort that use deoderant, hairspray or similar gas fuel. Because they make an explosion (like the gunpowder in an ammunition round) to propel the projectile they are technically classed as a firearm.

NOTE The photo shows two igniters so you can see it from different angles but the price is for one unit only.

NOTES Potato gun not included. If you want to make one Google it. Don't use DWV pipe!

Testntools is now on Facebook! "Like" us to be in on promo’s, special offers and new products