40-mm-Power-Jet with steering and reverse system
11-1/2" long, 2-1/2" wide. Weighs 10.5 oz.
This is perhaps the EASIEST drive system to install in a fast boat. It can be installed into deep-V´s, and flat bottom boats with by just making a simple cutout and some reinforcement in the boat bottom.

Turn rudders and reverse bucket are included.
Use glow engines from .21 to .90.

Design of the suction channel allows running at a pronounced tilt or in rough water. There´s no prop or rudder damage from running over rocks or other obstacles.
Strong glass fiber-filled nylon construction.
Shaft is 7 mm but the end to be coupled to a motor is 5 mm.
Impeller diameter is 40 mm (1.58")


tunnel dimensions : length: 170 mm
width: 55 mm
height: 55 mm
steering system dimensions : flange diameter: 66 mm
length: 110 mm
width: 60 mm
height: 50 mm
recommended engines : 22 ccm Zenoah or similar
static thrust : more than 1500 W
10.000 - 15.000 rpm
5 - 8 kp
operational range : 10.000 - 15.000 rpm