2" Inch Portable Engine Pump - 6.5 HP (GX200 engine) - HP20

This pump is a light weight self-priming engine driven pump supplied ready to operate complete with hose fittings and suction strainer.

Hose Options

*2" 20m Lay flat Roll + 2" 5m Suction Hose *2" 50m Lay flat Roll + 2" 5m Suction Hose *2" 100m Lay flat Roll + 2" 5m Suction Hose

Specifications:

• Power: 6.5 Horsepower
• Max Flow rate: 500 Litres per minute
• Max Pressure: 86 psi
• Self Priming: 7m Suction
• Max discharge head: 60 metres
• Inlet/Outlet sizes: 2 inch (50mm)
• Liquid temperature range: 2 - 35 deg C
• Maximum ambient temperature: 40 deg C
• Max operating pressure: 6 bar
• Package dimensions: 520 x 400 x 450

Features:

• GX200 6.5HP, 4 stroke, single cylinder petrol engine (Overhead Valve Design), Air cooled
• Easy to start and simple to operate
• Starting system: Recoil
• Maximum Engine Revs: 3600rpm
• Self priming for ease of use
• Aluminium pump head with cast iron impeller and volute
• Mechanical Seal: Carbon/Ceramic/Nitrile
• O rings and gaskets: Nitrile
• 3.5L fuel tank
• Run time per tank: 2-3 hours
• Engine oil capacity 600ml
• Heavy duty roll frame with rubber feet
• Low oil cut out system will prevent the engine from seizing should the pump tip over while running or run low on engine oil
• Weight 25.5 Kg

Applications:

• General water transfer
• Equipment washdown
• Firefighting
• De-watering flooded areas
• Filling water trucks

1 year warranty

Feel free to phone us to discuss your pump and filtration needs. Our phone and contact details can be viewed at: http://www.trademe.co.nz/stores/pumps-online/contact