Do It Yourself package includes

-Medium Gain 43* Element UHF aerial -500mm fascia/barge mount pole. -20m RG6 coax cable -Tech screws (4). -Cable tacks (10). -Cable ties (6). -Connectors (2)

*some manufacturers classify the X elements as two, others count them as four so total element numbers can be misleading. Keep this in mind when comparing aerials

NOTE - RG6 cable, tacks and ties are available in black or white - please specify - if you do not specify colour, I will send black.

This aerial is designed for the reception of Freeview HD, Igloo

• Heavy duty construction
• Solid 8mm dia mounting clamp
• Weatherproof low loss F type balun
• F connector and weatherproof boot
• Horizontal or vertical polarity
• Reflector with side supports
• Fixed angle reflector clamp holds reflector in optimum position
• cable clamp
• Designed for 470-694Mhz range to prevent possible (but unlikely) 4G 700Mhz interference

I will crimp the aerial end of the coax cable with a weatherproof connector ready for attachment to the aerial, and supply the connector for the TV end that you can fit yourself after running the cable unless you specify otherwise. If you want a variation of this eg. Different aerial, different type of mounting, staybars, shorter/longer cable, jigger boom... please ask.

Please note - To get freeviewHD reception you need to be in the freeviewHD coverage area. Check coverage at your location at http://www.freeviewnz.tv. Also, as with any aerial, if you have hills, buildings, or trees blocking the path between your aerial and your local freeviewHD transmitter site, you could possibly run into reception problems

Check out my other listings for similar / related products