Description

Tractor Trencher to suit Hydrastaic tractor

PTO shaft driven with heavy duty clutch for overload protection.

Outstanding performance in both earth and hard ground conditions.

Heavy duty 2" pitch chain with various widths available.

600mm discharge auger places dirt well away from trench.

Maximum digging depth 1200mm.

Designed for Hydrostatic tractors up to 45 horsepower.

Weight of trencher complete with 150mm earth chain = 385kg.

Note: Front counter weight or loader may be necessary for the proper transportation and operation of the tractor and trencher.

Trencher comes complete with 150mm earth chain. Tractor not included.

We supply equipment to Advancequip, Airman, Augertorque, Bobcat, Case, Caterpillar, Daewoo, Doosan, Earthworm, Hitachi, Hyundai, IHI, JCB, John Deere, Kato, Kobelco, Komatsu, Kubota, Liebherr, Mustang, Nagano, New Holland, Sumitomo, Sunward, Yanmar, Takeuchi, Terex, Volvo, Yanmar, Yuchai.

Details

Condition:

New

Questions & Answers (4)

C
Hi does this trencher take a 250mm chain ? couldy(63) • 10:26 am, Mon, 21 Jun
D
Hi. 1st of all we need to know tractor oil flow (L/M), then we can match trencher to suit. We do not recommend 250mm chain-too hard on the trencher bar. +64272226413 Heath digganz1(16) • Monday, 21 June 2021
fishym4n
I have a kubota L5740, it’s rated at 57hp and hydro static, do you think it’s still suitable for this? fishym4n(672) • 09:24 pm, Fri, 16 Jul
D
Hi. Our trenchers are able to handle 20-45hp. Check to see if you have the ability to de-rate your tractor. digganz1(16) • Friday, 16 July 2021
M
What ratio is the gearbox? Or what RPM is the chain doing at 540rpm? macgyvger(671) • 07:15 am, Tue, 12 Oct
D
Hi. What hydraulic oil flow (& model of tractor) does your machine produce per minute (L/M) ?? The trencher is 1/1-direct drive/flow. digganz1(16) • Tuesday, 12 October 2021
M
35hp Kubota. Why does the oil flow matter when it's PTO driven? We use a Trench-It trencher at the moment, and it feels like the chain goes too slow compared to our old trencher, which we don't know the make and model of, so trenching is a lot slower. So if your pto gearbox in your trencher is 1:1, I'll work out the ratio of ours to see what it is as well. macgyvger(671) • 08:50 am, Tue, 12 Oct
D
PM me & we'll talk +64272226413 Heath digganz1(16) • Tuesday, 12 October 2021