Skip to site navigation Skip to main content
main content
Leyland P76 V8 engine parts
$500.00

This listing closed and did not sell.

  • Browse for similar listings in Austin Rover
If you are the buyer or seller, for more options
Location icon Seller located in Gisborne, Gisborne ·430 views · 17 others watchlisted

Leyland P76 V8 engine parts

Description

Leyland P76 V8 engine parts block has been bored new pistons rings and bearings . I have some Rover heads to go with it two front covers a couple of flywheels and and a starter there is another starter but i think its a rover one .There is also a whole lot of other bits and pieces no inlet manifold or water pump. There is also two warm cams cannot remember the specs but will dig out the sheet.

Questions & Answers

  • Hi would you have any distributer points for sale ?? Whole distributer ?? Thanks ocker4(210)12:04 am, Tue, 3 Aug Sorry no mg1965(14) • Tuesday, 3 August 2021
  • Hi there,has the block been pressure tested to make sure there are no leaks between the liners and block.cheers Pete. billyh246(244)05:46 pm, Tue, 3 Aug Hello not as far as i know i brought it in bits mg1965(14) • Tuesday, 3 August 2021
  • Hey mate, so I'm assuming that everything is there to rebuild, except gaskets mintevo2(13)04:18 pm, Wed, 4 Aug Hello its missing a water pump and inlet manifold ,has a full gasket set forgot to put that in the ad mg1965(14) • Wednesday, 4 August 2021
  • are the cams new/ground or have they been used,are there any lifters at all.cheers Pete. billyh246(244)06:54 pm, Wed, 4 Aug Hello one cam is reground the other one has had about 30 mins running was in a 3.5 but was to lumpy. mg1965(14) • Wednesday, 4 August 2021
  • Cool would you have any idea how much it would cost to send it to dunedin? mintevo2(13)07:31 pm, Wed, 4 Aug Sorry no idea but am going toll Toll in the next couple of days to send some wheels so i will see if they can give me a rough idea mg1965(14) • Wednesday, 4 August 2021
  • That would be awesome cheers mintevo2(13)07:40 pm, Wed, 4 Aug $200 for the cam will have a look for the spec sheet in the weekend . mg1965(14) • Wednesday, 4 August 2021
  • i m keen on the hot cam. how much.?. falconxp65(209)03:54 pm, Thu, 5 Aug Hello have added photo of cam specs its the highlighted one have a look and see if its what you want cheers mg1965(14) • Thursday, 5 August 2021
  • Hi, is this the same as the 3.5 rover engine. Thanks. tui991(52)01:13 pm, Sat, 7 Aug Hello no the p76 v8 is 4.4 and is wider in the v they share some parts with the Rover motor mg1965(14) • Saturday, 7 August 2021
  • Hi does it have a good intake valley tin plate & seals? dbrown14(-1)02:42 pm, Sat, 7 Aug Hello i have a new gasket set but that will go with the motor mg1965(14) • Saturday, 7 August 2021
  • Have found two water pumps and another oil pump cover and filter housings Seller comment Saturday, 7 August 2021
  • Has this got everything there to rebuild it? And would you ship it to wanganui? also it this is a 4.4L ? Thanks zaken(663)05:40 pm, Sat, 7 Aug Yes 4.4 it has everything you should need no intake manifold was going to put a 4 barrel manifold on has rover heads i think the valves are bigger i have found some extra parts this afternoon have a couple of water pumps and a front cover with oil pump gears and filter housing no problem to ship mg1965(14) • Saturday, 7 August 2021
  • Is a new intake tin plate with it ? I have everything else to complete this thks dbrown14(-1)06:06 pm, Sat, 7 Aug Yes new valley cover and end seals mg1965(14) • Saturday, 7 August 2021
  • Have added cam spec sheet Seller comment Saturday, 7 August 2021
  • wow.. i missed the pedal box. by a long way.. i m still keen on a / or both perf cams though falconxp65(209)07:18 pm, Sat, 7 Aug
  • is your cam. 4 the 1 high lighted ? . or for the engine 3 lines above. falconxp65(209)07:39 pm, Sat, 7 Aug Highlighted one mg1965(14) • Saturday, 7 August 2021
  • Hello answer for mintevo 2 the freight to Dunedin is about $900 thats according to the mainfreight web site Toll would not give me a price till they saw the size and weight that seems a lot though Seller comment Saturday, 7 August 2021
  • re cam. 350 buick ? and rover / leyland cam the same ?. if so. yup its mine falconxp65(209)09:29 pm, Sat, 7 Aug Yes same as p76 or rover mg1965(14) • Saturday, 7 August 2021
  • for cam 09 four 0 5ive 9 five 9ine f4 falconxp65(209)09:31 pm, Sat, 7 Aug Hello being i get everything else but what is f4 mg1965(14) • Saturday, 7 August 2021
  • Looked at other motors to get a idea on freight about $250 seems to be the average Seller comment Sunday, 8 August 2021
  • f4= 4. yup keen falconxp65(209)10:33 am, Sun, 8 Aug Tried to contact you nothing happening just a beep mg1965(14) • Sunday, 8 August 2021
  • I’m local will purchase cam / lifters and flywheel. How to proceed . jackdaniels2(382)04:04 pm, Sun, 8 Aug Hello i have another isky cam 270/470 hyd and a flywheel no lifters out at my shed tomorrow 102 A main Rd makaraka come out and see if its what you want cheers mg1965(14) • Sunday, 8 August 2021
  • 09 4059 594, cheers falconxp65(209)04:39 pm, Sun, 8 Aug
  • Hi just to be clear is the motor coming with esky 270 cam & lifters? dbrown14(-1)07:11 pm, Sun, 8 Aug Yes but looked at the lifters yesterday and they have got surface rust on them dont think they will be usable been sitting around too long but if you are keen and buy it will get some new ones mg1965(14) • Sunday, 8 August 2021
Closed: Sun 8th Aug, 9:42pm

Starting price

$500.00

No reserve

No bids

Advertisement

Shipping options

Destination & description Price
To be arranged N/A
Pick-up available from Gisborne, Gisborne Free

Payment options

Seller accepts
Ping, NZ Bank Deposit

mg1965

100% positive feedback
Location
Gisborne
Member since
Friday, 25 May 2012
View seller's other listings

Other listings you might like

Page views: 430 Listing #3203304576
New Welcome to the new-look Trade Me
Learn more