Add a Circuit In Line Blade Fuse Holder Tap a Fuse
The fastest and easiest way to tap power for your car accessories without splicing and cutting the original (OEM)wire. With this in line fuse holder, one simply taps power from the fuse box by piggy backing on the desired fuse slot and turns that slot into two . One slot on the holder will retain the fuse slot of the existing OEM circuit and the other holder adds a second slot for the new circuit.
This comes with three versions; Regular Blade, Mini Blade and Low Profile Blade (sometimes incorrectly called Micro Blade). Each holder comes with five assorted blade fuses. Buyer must specify which type of Blade fuse after closing the auction.
***Pick the desired fuse slot you want to tap in the fuse box ***Remove the fuse from the chosen slot in the fuse box ***Insert the removed fuse into the bottom fuse slot (close to the blade) of this holder ***Connect the wire of this fuse holder to the power line (+12V) of the car accessory ***Insert the required fuse for the accessory into remaining fuse slot of the holder. ***Plug this fuse holder back into the slot of the fuse box where you removed the fuse ***Remember to connect the ground wire of the accessory to the car chassis or the negative terminal of the battery.
1x Add a circuit in Line Blade Fuse Holder (wire length 12 cm) 5x Blade Fuse (assorted)
Buyer must specify the type of blade fuse after closing the aauction (Regular, Mini or Low-Profile Mini - “micro”). Seller will not accept return or replacement for wrong choice made by buyer.
Blade fuse size reference (L x W x H) – Regular Blade Fuse (19.1 x 5.1 x 18.5mm), Mini Blade Fuse (10.9 x 3.6 x 16.3mm), Low Profile Mini (10.9 x 3.81 x 8.73 mm)
Questions & Answers