This listing closed and did not sell.
- Browse for similar listings in Fuel systems
E85 COMPATIBLE IN-TANK FUEL PUMP KIT (340L/h)
AEM E85 COMPATIBLE HI-FLOW IN-TANK FUEL PUMP 340L/h
Has your original fuel pump crapped out? Here's a top quality aftermarket in-tank fuel pump replacement that is more than likely going to suit your particular application / vehicle*.
Maybe your BMW, misses and coughs and takes ages to start? Or perhaps you have spent $100's or even $1000's on making your Honda VTEC scream with lots of go fast bits only to find the engine ain't getting enough fuel. This in-tank fuel pump could be the solution your after!
AEM’s High Flow In-Tank Fuel Pump (#50-1200) is designed for high performance and forced induction EFI vehicles**. The in-tank pump flow is up-to 340L/h (5.67L/min) at 40 PSI and can support engines up to 1,000hp (745kW) at 43 PSI.
The pump is designed to withstand the low lubricity characteristics of ETHANOL and METHONAL fuels and is tested to work with these up to E100 / M100 and all grades of petrol available in NZ.
WHAT'S IN THE BOX: PN: 50-1200 (81mm dia. body with offset 11mm OD inlet and discharge in-line) 1 x Alcohol Compatible (Ethanol & Methanol) 340 LPH Fuel Pump 1 x Alcohol Compatible Electrical connector 1 x Pre-filter 1 x Fuel Hose 2 x Hose Clamps 1 x Pump Isolator Sleeve (used in some OEM style applications) 1 x Pump End Isolator (used in some OEM style applications) 1 x Instructions
Note: this in-tank pump is a semi-universal unit and may not be suitable for some vehicles. Professional installation is recommended. *Note: This fuel pump is intended for electronic fuel injection systems only. It is not suitable for N/A (carbureted) engines.
Key Words: E85 E95 E100 M100 Universal OEM Compatible EFI Ceramic Kit Drift LS1 LS2 LS3 LS7 L98 XR6 XR8 1JZ 2JZ K20 RB30 GTR RB20 RB25 RB30 RB26