Skip to site navigation Skip to main content
main content
Davies Craig, Digital Thermatic Fan Switch With 1/4" NPT Sensor, DC-0445
$102.80 per item

This listing closed and did not sell. The item has been relisted.

Closes: Thu 21 Oct, 02:55 pm | Location icon Seller located in Kerikeri, Northland ·72 views

Davies Craig, Digital Thermatic Fan Switch With 1/4" NPT Sensor, DC-0445

Description

This Digital Thermatic Fan Switch Kit can be used with Thermatic Electric Fans, EWP's and competitors Fans.

It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or the sensor can now also be placed directly into the coolant system in combination with a Temperature Sensor Adaptor Kit (Part # 317-DC-0409).

Can be used for 12 or 24* volt applications and has an adjustable temperature range of 104ºF to 230ºF (40°C to 110°C) which can show Centigrade or Fahrenheit. Temp is set by pressing the set button. It can run 1 or 2 fans. The second fan (if applicable) will start 10 seconds after Fan #1 runs. It operated thermally & also when the air conditioning is in operation.

Specifications:

Max voltage: 12 to 27V (For 24V, relays need to be changed, not supplied in kit) Max current: 40A per Fan Relay setup: Dual relay Speed: Single speed, 10 second delay to start up the second fan Applications: Suitable for single and dual fan applications Screen Display: LED digital temp display, actual temp + set temp Temp Display: Centigrade or Fahrenheit Temp settings: 40°c to 110°c (104°F to 230°F) Temp setting: Push Button Circuit type: Pre-programmed micro controller Output wires: Batt + Batt - IGN, AC Clutch, Fan #1, Fan #2 Thermistor Probe Dimensions: 3-3/4" (95mm) x 2-9/16" (65mm) x 2-3/16" (56mm) The unit is NOT WaterProof

Sensor Wire length: 142cm in total (Wire from switch 112cm plus sensor connector 30cm)

*Note: if using this switch for use with our EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP (Electric Water Pump) control, we would recommend part number 8001 which can manage both the EWP and your Thermatic Fans.

(If K&N) Before buying you must first check dimension & cross ref info, regardless of listing description. Freight is not refundable

Questions & Answers

No questions have been asked!
Asking price

Was $136.59

Advertisement

Shipping options

Destination & description Price
With Tracking DC-0445 $8.00
Rural delivery DC-0445 $12.00
Shipping more than one item No extra charge

Seller does not allow pick-ups

Payment options

Seller accepts
Ping, Afterpay, NZ Bank Deposit

dsrturbo

99.4% positive feedback
address verified in trade
Location
Kerikeri
Member since
Tuesday, 28 April 2009
View Store
Page views: 72 Listing #3303548932 Community Watch: Report this listing
New Welcome to the new-look Trade Me
Learn more