Car Paintless Dent Removal DIY Kit A02
The pull bridge is an effective dent repair tool. It can remove dents by yourself, and can be used to repair surface dents such as cars, refrigerators, motorcycle bodies, washing machines, etc.
Six different sizes, will suit for different size dents. Main material: aluminum alloy, strong and durable
How to use the bridge puller?
- Clean the dent with a clean wet cloth.
- Select a suitable traction tab (large dent requires large traction tab).
- Insert the glue stick into the glue gun and plug in the power for about 3-5 minutes.
- Buckle the glue gun trigger and use the heated glue to fill the selected traction tab.
- Quickly place the traction tab with hot melt adhesive on the center part of the dent, gently press and hold until the hot sol is solidified, let the hot glue dry for about 5 minutes.
- Align the hole in the middle of the bridge to the attached traction tab. Put the screw spin button on the traction rod and slowly tighten until the dent part to surface flush with the surrounding.
- After dent repaired, screw rotation knob, remove the traction bridge and then remove the traction tabs.
- The method of taking the tab and removing the residual glue: You can use gasoline or alcohol, or use water that is not too hot. If the glue is a little soft, it can be cleaned by hand or plastic shovel.
- Glue stick and glue gun is NOT included
Package Include: 1 x Paint less Dent Bridge Puller 6 x Different Shape Tabs