Code 1010506 Motion detector (PIR), Black. Automatic lighting control based on presence and brightness. 180° detection angle, with 6mt wide x 12mt in front semi-circular detection range. For outdoor use, IP55 Additional creep under protection. Sensor head can be turned by ± 90° horizontally and by 30° downwards. Adjustable brightness switching value and switch-off delay. Mixed light measurement suitable for the control of fluorescent, incandescent, halogen lamps and LEDs. Zero-cross switching for relay-saving switching and high lamp loads. Teach-in of current brightness value possible. Pulse function. Test function for checking detection area. Installation on flush-mounted socket possible (60 mm). Single-handed plug-in installation. Instant start-up possible via factory preset. Controls are place protected. Terminal for protective earth conductor. Type - Motion Detector (PIR) Detection Angle - 180° Colour - Black Features - Adj. sensor +/- 90° horizontally, 30° downwards Outdoor Use - IP55 Installation Height - 2 to 4 mt Power - 230V AC, 50Hz, 10A