Listing Detail Tabs
You can't get any more extreme than this in terms of single phase compressors!
With a free air delivery of 11.3 (at 90PSI) cubic feet per minute (16CFM displacement) this machine is perfect for use with any air tools if you are working in a workshop by yourself it will even handle sanding and professional spray painting!
HOW DOES IT DO THAT?! Well... This compressor features a heavy duty fully cast 3 cylinder pump coupled with a 70L tank. Add a high quality copper wound 3hp motor and you're on to a winner!
This machine can also be used constantly over long periods of time as it includes an option for continuous run use (see below) to increase the life of your compressor.
I see ads out there for 2hp 40L compressors that say they are great for spray painting!? Don't get sucked in! This is the machine you need! Continuous run: One of the worst things for electric induction motors is starting and stopping them in a regular basis.
This often happens when using compressors for sanding and spray painting due to the large volume of air used. Continuous run disengages the pump rather than the motor thus increasing the life of the motor. Big handle and pneumatic wheels making it easy to shift around.
Please note that this machine has been fitted with a 15 Amp plug to comply with NZ electrical regulations due to its high power consumption. This machine will not plug into a standard 3 pin 10 Amp power outlet and modifications may need to be made before operation.
Contact an electrician or one of our stores for more information.
Motor size - 3hp
Cylinders - 3 RPM - 1020 RPM
Pump Tank size - 70L
Pump displacement - 16.2CFM 459L/Min
Free Air Delivery at 90PSI - 11.3CFM 321L/Min
Voltage - 230 single phase
Dimensions – over handles 800mm H x 1200mm L x 800mm W
Net Weight - 92kg